Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add an Address Pool

You are here: Configure > Security Objects > Address Pools.

Procedure

To add an address pool:

  1. Click the add icon (+) on the upper right side of the Address Pools page.

    The Create Address Pool page appears.

  2. Complete the configuration according to the guidelines provided in Table 182.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 182: Fields on the Create Address Pool Page

Field

Description

General

Pool Name

Enter the address pool name.

Network Address

Enter a IPv4 address for the address pool.

XAUTH Attributes

Primary DNS Server

Enter the primary-dns IPv4 address.

Secondary DNS Server

Enter the secondary-dns IPv4 address.

Primary WINS Server

Enter the primary-wins IPv4 address.

Secondary WINS Server

Enter the secondary-wins IPv4 address.

Address Ranges

Add

Click + to add a new address range for the address pool.

Name

Enter a name for the IP address range.

Lower Limit

Enter the lower limit of the address range.

High Limit

Enter the upper limit of the address range.

Delete

Click the delete icon to delete the address range for the address pool.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit