Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

About the Static Page

You are here: Configure > Security Services > NAT > Static.

Use tis page to configure static NAT.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 215 describes the fields on the Static page.

Table 215: Fields on the Static Page

Field

Description

Static NAT Rule Set

From

Displays the destination NAT sort options from which the packets flow.

The options available are:

  • Routing Instance

  • Zone

  • Interface

Filter

Displays the filter options.

Name

Displays the name of the static NAT rule set.

From

Displays the name of the routing instance, zone, or interface from which the packets flow.

Rule

Displays the name of the rule in the selected static NAT rule set.

Description

Displays a description of the static NAT rule set.

Rules in Selected Rule-Set

Rule Name

Displays the name of the routing instance, zone, or interface to which the packet flows.

Source Addresses

Displays the source address to match the rule.

Source Ports

Displays the source port number.

Destination Addresses

Displays the destination address to match the rule.

Destination Ports

Displays the destination port number.

Prefix

Displays the static IP address prefix.

Mapped Port

Displays the destination port or port range to allow static NAT to map ports.

Upper Threshold

Displays the upper threshold value of the at which an SNMP trap is triggered.

Lower Threshold

Displays the lower threshold value of the at which an SNMP trap is triggered.

Description

Displays the description of the rule in the selected static NAT rule set.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit