Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor System Alarm

About System Alarm Page

You are here: Administration > Network Monitoring > Alarm > System Alarm.

You can enable system login alarm login classes. The configured Login Classes will display system alarms while logging in.

Create System Alarm Configuration

Procedure

To create System Alarm Configuration:

  1. Enter the information specified in Table 319 to create System Alarm Configuration.

    Table 319: RPM Information Troubleshooting Options

    Field Function
    Currently Running Tests

    Graph

    Click the Graph link to display the graph (if it is not already displayed) or to update the graph for a particular test.

    Owner

    Configured owner name of the RPM test.

    Test Name

    Configured name of the RPM test.

    Probe Type

    Type of RPM probe configured for the specified test. Following are valid probe types:

    • http-get

    • http-get-metadata

    • icmp-ping

    • icmp-ping-timestamp

    • tcp-ping

    • udp-ping

    Target Address

    IP address or URL of the remote server that is being probed by the RPM test.

    Source Address

    Explicitly configured source address that is included in the probe packet headers.

    If no source address is configured, the RPM probe packets use the outgoing interface as the source address, and the Source Address field is empty.

    Minimum RTT

    Shortest round-trip time from the J Series device to the remote server, as measured over the course of the test.

    Maximum RTT

    Longest round-trip time from the J Series device to the remote server, as measured over the course of the test.

    Average RTT

    Average round-trip time from the J Series device to the remote server, as measured over the course of the test.

    Standard Deviation RTT

    Standard deviation of round-trip times from the J Series device to the remote server, as measured over the course of the test.

    Probes Sent

    Total number of probes sent over the course of the test.

    Loss Percentage

    Percentage of probes sent for which a response was not received.

    Round-Trip Time for a Probe

    Samples

    Total number of probes used for the data set.

    The J Series device maintains records of the most recent 50 probes for each configured test. These 50 probes are used to generate RPM statistics for a particular test.

    Earliest Sample

    System time when the first probe in the sample was received.

    Latest Sample

    System time when the last probe in the sample was received.

    Mean Value

    Average round-trip time for the 50-probe sample.

    Standard Deviation

    Standard deviation of the round-trip times for the 50-probe sample.

    Lowest Value

    Shortest round-trip time from the device to the remote server, as measured over the 50-probe sample.

    Time of Lowest Sample

    System time when the lowest value in the 50-probe sample was received.

    Highest Value

    Longest round-trip time from the J Series device to the remote server, as measured over the 50-probe sample.

    Time of Highest Sample

    System time when the highest value in the 50-probe sample was received.

    Cumulative Jitter for a Probe

    Samples

    Total number of probes used for the data set.

    The J Series device maintains records of the most recent 50 probes for each configured test. These 50 probes are used to generate RPM statistics for a particular test.

    Earliest Sample

    System time when the first probe in the sample was received.

    Latest Sample

    System time when the last probe in the sample was received.

    Mean Value

    Average jitter for the 50-probe sample.

    Standard Deviation

    Standard deviation of the jitter values for the 50-probe sample.

    Lowest Value

    Smallest jitter value, as measured over the 50-probe sample.

    Time of Lowest Sample

    System time when the lowest value in the 50-probe sample was received.

    Highest Value

    Highest jitter value, as measured over the 50-probe sample.

    Time of Highest Sample

    System time when the highest jitter value in the 50-probe sample was received.

  2. Click OK to create System Alarm Configuration.

    System Alarm Configuration page appears.

  3. Click Cancel to cancel your entries and returns to the System Alarm Configuration page.

Edit System Alarm Configuration

Procedure

To edit System Alarm Configuration:

  1. Click the pencil icon on the upper right side of the System Alarm Configuration page.

    See Table 319 for the options available for editing the System Alarm Configuration page.

  2. Click OK.

See Also

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit