Help Center User GuideGetting Started
User Guide
Getting Started

Configure VPN

Note This menu is available only for SRX300 lines of devices and SRX550M device.

You are here: Configure > Device Settings > VPN.

A virtual private network (VPN) provides a means for secure communication among remote computers across a public WAN, such as the Internet.

Click Launch VPN Wizard. This wizard leads you through the basic required steps to configure basic settings for a router-based VPN. To configure a VPN with a complete set of options, use either the J-Web interface or the command-line interface (CLI).

As you use this wizard, refer to the upper left area of the page to see where you are in the configuration process. Refer to the lower left area of the page for help related to the current page and its contents.

When you click a link under the Resources heading in the lower left area, the document opens in your browser. If it is in a new tab, be sure to close only the tab (not the browser window) when you close the document.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support