Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor Application Firewalls

You are here: Monitor > Security Services > Application FW.

Use this page to view rule set, rules in selected rule set, and counters for selected rule-set.

Table 91 describes the fields on the Application FW page.

Table 91: Fields on the Application FW Page

Field

Description

Rule Set

Name

Displays the rule sets configured for the device.

Select a rule set to display its associated rules and counters in the lower panes.

Default Rule

Displays the action taken when traffic does not match any of the associated rules.

  • permit—Permits all traffic that does not match any rule in the rule set.

  • deny—Denies all traffic that does not match any rule in the rule set.

Rules

Displays the rule names associated with the rule set.

Refresh

Click the refresh icon at the top right corner to display the fresh content.

Rules in Selected Rule Set

Rule Name

Lists the names of the rules included in the rule set.

Match Dynamic Applications

Displays the dynamic applications used as match criteria for the associated rule.

Action

Displays the action to be taken if the traffic matches the associated rule’s match criteria.

  • permit—Permits traffic that matches the rule.

  • deny—Denies traffic that matches the rule.

Counters for Selected Rule-Set

Refresh interval (sec)

Specifies the interval in seconds when counter values are refreshed.

Counter

Displays the counter for rule in the rule set

Value

Displays the value for rule in the rule set

Clear Statistics

Clears the statistics in the associated pane.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit