Monitor Flow Session

You are here: Monitor > Flow Session.

Use this page to view flow session information of the respective session.

Table 1 describes the fields on the Flow Session page.

Table 1: Fields on the Flow Session Page

Field	Description
Flow Session Search	Provides the option to search sessions.
Application	Displays the application name for the session summary.
Protocol	Provides the option to enter protocol details.
Source IP/Prefix	Enter the IP address of the authentication source.
Dest IP/Prefix	Enter the IP address of the authentication destination.
Search	Enables you to search for the flow session after all details are entered.
Reset	Enables you to go back to the default configuration.
Advanced	Provides you advanced options to search for Flow sessions. Enter the below details: Application—Displays the application name for the session summary. Source IP/ Prefix—Enter the IP address of the authentication source. Source Port—Enter the specified source port. Protocol—Provides the options to enter protocol details. AppFW Rule Set—Displays the number of application firewall rule set configurations . Application Group—Enables you to collect application group statistics. Interface—Select an interface from the list. Dest IP/ Prefix—Enter the IP address of the authentication destination. Dest Port—Enter the specified destination port Family—Select an option from the list. Application Firewall—check the box to permit, reject, or deny traffic based on the application of the traffic. Application QoS - displays traffic based on application type and limits the amount of bandwidth an application can consume. Note: This option is available only with SRX4000 and SRX5000 line of devices.
Flow Session Summary	Provides a summary of the all the options selected in the Flow Gate.
Clear	Provides the option to clear the session details statistics. Click Clear to clear the details session statistics.
Flow Session Information
Session ID	Displays the number that identifies the session. Use this ID to get more information about the session.
Policy	Displays the policy that permitted the traffic.
TimeOut	Displays the idle timeout after which the session expires.
Status	Displays the status of the session.
Source IP/Port	Enter the IP address of the authentication source.
Protocol	Provides the option to enter protocol details. Enter the protocol details.
InComing IF	Displays the incoming flow (source and destination IP addresses, application protocol, and interface).
Outgoing IF	Displays the reverse flow (source and destination IP addresses, application protocol, and interface).
AppSecure Detail	Displays list of all enabled and disabled application signatures and existing application rule sets on the device.
Refresh	Click the refresh icon at the top right corner to display the fresh content.

Monitor Flow Session

Related Documentation