Add a Rewrite Rule
You are here: Configure > Network > Class of Service > Rewrite Rules.
To add a rule configuration:
- Click the add icon (+) available on the right
side of the Forwarding Class page.
The Add Rewrite Rule page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Add Rewrite Rule Page
Rewrite rule name
Enter the name of a defined rewrite rule.
Rewrite rule type
Select a rewrite rule type from the list.
Code point mapping
Specifies the code point mapping created.
Egress/Outgoing Code point
Select a CoS value and alias from the list.
Select the forwarding class of the rewrite rule from the list.
Select the loss priority of the rewrite rule from the list.