Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Add a Classifier

 

You are here: Configure > Network > Class of Service > Classifiers.

To add a Classifier:

  1. Click the add icon (+) available on the right side of the Classifiers page.

    The Add Classifier page appears.

  2. Complete the configuration according to the guidelines provided in Table 1.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1: Fields on the Add Classifier Page

Field

Description

Classifier name

Enter the classifier name.

Classifier type

Select a classifier type from the list.

  • J Series (J6350), SRX210, SRX240, SRX650:

    • dscp—Differentiated Services code point classifier for IPv4.

    • dscp-ipv6—Differentiated Services code point classifier for IPv6.

    • exp—MPLS experimental bits classifier.

    • ieee-802.1—IEEE-802.1 classifier.

    • ieee-802.1ad—IEEE-802.1ad classifier.

    • inet-precedence—Precedence classifier for IPv4.

  • SRX3400, SRX3600, SRX5600, SRX5800:

  • dscp—Differentiated Services code point classifier for IPv4.

  • dscp-ipv6—Differentiated Services code point classifier for IPv6.

  • ieee-802.1—IEEE-802.1 classifier.

  • ieee-802.1ad—IEEE-802.1ad classifier.

  • inet-precedence—Precedence classifier for IPv4.

Code point mapping

Specifies the code point mapping created.

The available options are as follows:

  • Add—Click + to add a code point mapping.

  • Edit—Click pencil icon to edit the selected code point mapping.

  • Delete—Deletes the code point mapping.

Code point

Select the CoS value in bits and the alias of a classifier from the list.

Forwarding class

Select the forwarding class for the specified CoS value and alias from the list.

Loss priority

Select the loss priority for the specified CoS value and alias from the list.

Related Documentation