Ready. Set. Let’s go!
Set up your Juniper Web Device Manager with these high-level steps and start managing your SRX Series devices.
Getting Started panel appears by default when you log in to J-Web. You can also access this panel anytime using the help (?) icon.
Note Logical system users and tenant users with read only permissions can only view the configuration from the Getting Started panel.
Add an logical interface to define both the physical properties of the link and the logical properties of a logical interface on the link. These interfaces act as a doorway through which traffic enters and exits a device.
To configure an interface port:
The Ports page appears.
The Add Interface page appears.
You are redirected to the Ports page and a message appears to commit the configuration.
The commit successful message appears.
Security zones are logical entities to which one or more interfaces are bound. Use zones to define one or more network segments requiring the regulation of inbound and outbound traffic through policies.
To configure a zone:
The Zones/Screens page appears.
The Add Zone page appears.
You are redirected to the Zones/Screens page and a message appears to commit the configuration.
The commit successful message appears.
Use security policies to control traffic from a specified source to a specified destination using a specified service. The security policy applies the security rules to the transit traffic within a context (from-zone to to-zone).
To configure a security policy:
The Rules page appears.
The Create Rule page appears.
You are redirected to the Rules page and a message appears to commit the configuration.
The commit successful message appears.
Use Network Address Translation (NAT) functionality for translating IP addresses in Junos OS on the SRX Series devices.
The Source page appears.
Note You can choose to configure source, destination, or static NAT.
The Add Rule Set page appears.
You are redirected to your selected NAT page and a message appears to commit the configuration.
The commit successful message appears.
Use license management to view the available licensed features, number of licenses used, installed, required, and license expiry details on your SRX Series device. Also, you can add, delete, update, or download the license keys.
Note This option is not available for logical system users and tenant users.
To manage a license key:
The License Management page appears. You can view the summary of the feature licenses.
Click Add, provide relevant data for all fields, and then click OK to add a license key with the J-Web license manager.
Select the check box of the license or licenses and then click Delete to delete one or more license keys with the J-Web license manager.
Click Update to update the existing license key with the J-Web license manager.
Click Update Trial to updates the trial license key with the J-Web license manager.
Click Display Keys to display the license keys installed on the device with the J-Web license manager.
Click Download Keys to download the license keys installed on the device with the J-Web license manager