Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add a Destination NAT Pool

You are here: Configure > Security Services > NAT > Destination.

Procedure

To add a Destination NAT Pool:

  1. Click the add icon (+) on the upper right side of the Destination page.

    The Add Rule Set page appears.

  2. Complete the configuration according to the guidelines provided in Table 215.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 215 describes the fields on the Add Rule Set Page.

Table 215: Fields on the Add Rule Set Page.

Field

Action

Destination Rule Set
Add Rule Set

Rule Set Name

Specifies the name of the rule set.

Enter the rule set name.

Rule Set Description

Specifies a description for the rule set.

Enter a description for the rule set.

From

Specifies the filter options. Select an option:

  • Routing Instance

  • Zone

  • Interface

Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column.

Add Rule

Rule Name

Specifies the name of the rule.

Enter the rule name.

Rule Description

Specifies a description for the rule.

Enter a description for the rule.

Match

Source Address

Specifies the source IP address. The options available are:

  • Available—Specifies the available source addresses.

  • Selected—Specifies the selected source addresses.

Search and select the source addresses in the Available column and the use the right arrow to move them to the Selected column.

You can also enter a source address in the New text box in the Selected column and click Add to add the source address to the lower pane of the Selected column.

Destination Address

Enter the destination IP address.

Port

Enter the destination port number.

IP Protocol

Specifies the IP protocol for the destination NAT rule.

Enter the protocol name in the text box and click Add to add the protocol to the IP Protocol column.

Actions

Specifies the actions for the destination NAT pool. Select an option:

  • No Destination NAT.

  • Do Destination NAT With Pool.

Do Destination NAT With Pool

Add New Pool

Specifies the add option for the Do Destination NAT With Pool option.

Click Add New Pool.

Add Destination Pool

Pool Name

Enter the name of the destination pool.

Pool Description

Enter a description for the destination pool.

Routing Instance

Select an option.

Pool Addresses and Port

Address/Port

Enter the destination pool address.

Port

Enter the destination pool port number.

Address Range

Enter the destination pool address range.

Destination NAT Pool
Add Destination Pool

Pool Name

Enter the destination pool name.

Pool Description

Enter a description for the destination pool.

Routing Instance

Specifies the routing instance available.

Select an option.

Pool Addresses and Port

Address/Port

Enter the destination pool address.

Port

Enter the destination pool port number.

Address Range

Enter the destination pool address range.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit