Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add a DS-Lite

You are here: Configure > Network > DS-Lite.

Procedure

To add a DS-Lite:

  1. Click + on the upper right side of the DS-Lite page.

    The Add DS-Lite page appears.

  2. Complete the configuration according to the guidelines provided in Table 155.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel instead.

    If you click OK, a new DS-Lite is added.

Table 155: Fields on the Add DS Lite Page

Field

Description

Name

Enter a name for the DS-Lite configuration.

Concentrator

Enter an IP address of the softwire concentrator.

Type

Select the softwire type from the list.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit