Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor LSP Statistics

You are here: Monitor > MPLS > LSP Statistics.

Use this page to view statistics for LSP sessions currently active on the device.

Table 70 describes the fields on the LSP Statistics page.

Table 70: Fields on the LSP Statistics Page

Field

Description

Ingress LSP

Information about LSPs on the inbound device. Each session has one line of output.

Egress LSP

Information about the LSPs on the outbound device. Each session has one line of output.

MPLS learns this information by querying RSVP, which holds all the transit and outbound session information.

Transit LSP

Number of LSPs on the transit routers and the state of these paths.

MPLS learns this information by querying RSVP, which holds all the transit and outbound session information.

To

Destination (outbound device) of the session.

From

Source (inbound device) of the session.

State

State of the path: Up, Down, or AdminDn.

AdminDn indicates that the LSP is being taken down gracefully.

Packets

Total number of packets received on the LSP from the upstream neighbor.

Bytes

Total number of bytes received on the LSP from the upstream neighbor.

LSPname

Configured name of the LSP.

Total

Total number of LSPs displayed for the particular type—ingress (inbound), egress (outbound), or transit.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit