Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor Route Information

You are here: Monitor > Routing > Route Information.

Use this page to view information about routes in a routing table, including destination, protocol, state, and parameter information.

Table 57 describes the fields on the Route Information page.

Table 57: Fields on the Route Information Page

Field

Description

Route Filter

Destination Address

Specifies the destination address of the route.

Enter the destination address.

Protocol

Specifies the protocol from which the route was learned.

Enter the protocol name.

Next hop address

Specifies the network layer address of the directly reachable neighboring system (if applicable) and the interface used to reach it.

Enter the next hop address.

Receive protocol

Specifies the dynamic routing protocol using which the routing information was received through a particular neighbor.

Enter the routing protocol.

Best route

Specifies only the best route available.

Select the view details of the best route.

Inactive routes

Specifies the inactive routes.

Select the view details of inactive routes.

Exact route

Specifies the exact route.

Select the view details of the exact route.

Hidden routes

Specifies the hidden routes.

Select the view details of hidden routes.

Search

Applies the specified filter and displays the matching messages.

To apply the filter and display messages, click Search.

Reset

Resets selected options to default

To reset the filter, click Reset.

Route Table

Static Route Addresses

The list of static route addresses.

Generate Report

Creates an HTML report based on the - specified parameters.

refresh

Click the refresh icon at the top right corner to display the fresh content.

Protocol

Protocol from which the route was learned: Static, Direct, Local, or the name of a particular protocol.

Preference

The preference is the individual preference value for the route.

The route preference is used as one of the route selection criteria.

Next Hop

Network Layer address of the directly reachable neighboring system (if applicable) and the interface used to reach it.

If a next hop is listed as Discard, all traffic with that destination address is discarded rather than routed. This value generally means that the route is a static route for which the discard attribute has been set.

If a next hop is listed as Reject, all traffic with that destination address is rejected. This value generally means that the address is unreachable. For example, if the address is a configured interface address and the interface is unavailable, traffic bound for that address is rejected.

If a next hop is listed as Local, the destination is an address on the host (either the loop back address or Ethernet management port 0 address, for example).

Next hop address

Specifies the network layer address of the directly reachable neighboring system (if applicable) and the interface used to reach it.

Enter the next hop address.

Age

How long the route has been active.

State

Flags for this route.

There are many possible flags.

AS Path

AS path through which the route was learned. The letters of the AS path indicate the path origin

  • I—IGP.

  • E—EGP.

  • ?—Incomplete. Typically, the AS path was aggregated.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit