Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Add a Content Filtering Profile


You are here: Configure > Security Services > UTM > Content Filtering.

To add a content filtering profile:

  1. Click the add icon (+) on the upper right side of the Content Filtering Profiles page.

    The Create Content Filtering page appears.

  2. Complete the configuration according to the guidelines provided in Table 1.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1: Fields on the Create Content Filtering Profiles Page




Profile Name

Enter a unique name for the antispam profile.

Permit Command List

Select the protocol command name to be permitted from the list.

Block Command List

Select the protocol command name to be blocked from the list. By blocking certain commands, traffic can be controlled on the protocol command level.

Block Extension List

Select the extension to be blocked from the list.

Block MIME List

Select the MIME type from the list.

Block MIME Exception List

Select the MIME type to be excluded from the list.

Block Content Type

Select the content type to be blocked.

Notification Options

Notification Type

Specifies the type of notification sent when a content block is triggered.

Select the Protocol Only or the Message check box.

Notification Mail Sender

Specifies that when a virus is detected and a content block is triggered, an e-mail is sent to the administrator.

Select the Notify Mail Sender check box.

Custom Notification Message

Specifies the customized message text for the content-block notification.

Enter the text for this custom notification message (if you are using one).