Add a Local Auth Entry
You are here: Configure > Security Services > User Firewall > Local Auth.
To add a local auth entry:
- Click the add icon (+) on the upper right side
of the Local Auth page.
The Add Local Auth Entry page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Add Local Auth Page
Enter an IP address for the local authentication.
Enter a username for the local authentication.
Enter roles for the local authentication entry. Enter the role and click + to add a role.
To delete a role, select the role and click the delete (X) icon.
Note: You can configure only maximum of 200 roles for a local authentication entry.