Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Add Zone Addresses

 

You are here: Configure > Security Services > Security Policy > Objects > Zone Addresses.

To create a zone address or address set:

  1. Click the add icon (+) on the upper right side of the Zone Addresses page.

    The Create Addresses page appears.

  2. Complete the configuration according to the guidelines provided in Table 1.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

describes the fields on the Create Addresses page.

Table 1: Fields on the Create Addresses Page

Field

Action

Object Type

Select an option from the list: Address or Address Group.

Addresses or Address Sets

Zone

Select a zone from the list to which the address is applied.

Name

Enter the address name.

Description

Enter the description for the address.

Type

Select an option from the list: Host, Range, or DNS host.

Host IP

Enter the IPv4 or IPv6 address.

Note: This option is available if you have selected Host type.

Start Address

Enter the start IPv4 or IPv6 address.

Note: This option is available if you have selected Range type.

End Address

Enter the end IPv4 or IPv6 address.

Note: This option is available if you have selected Range type.

DNS Name

Enter a domain hostname.

The string must include alphanumeric characters, periods, dashes, no spaces are allowed and must end with an alphanumeric character.

Note: This option is available if you have selected DNS Host type.

Address Sets

Displays the address set name. Select the address set.

Create Address Set

Enter the address set name and click + to add the address set in the Address Sets.

Address Set Name

Enter a name for address set.

Note: This option is available if you have selected Address Group for Object type.

Description

Enter a description for address set.

Note: This option is available if you have selected Address Group for Object type.

Address List

Specifies which of the preexisting addresses should be included or excluded from the address set.

Select the addresses from the list in the Available column and then click the right arrow to move it to the Selected column.

Note: This option is available if you have selected Address Group for Object type.

Related Documentation