Add a Classifier
You are here: Configure > Network > Class of Service > Classifiers.
Procedure
- Click the add icon (+) available on the right
side of the Classifiers page.
The Add Classifier page appears.
- Complete the configuration according to the guidelines
provided in Table 160.
- Click OK to save the changes. If you want to
discard your changes, click Cancel.
Table 160: Fields on
the Add Classifier Page
Field | Description |
|---|
Classifier name | Enter the classifier name. |
Classifier type | Select a classifier type from the list. J Series (J6350), SRX210, SRX240, SRX650: dscp—Differentiated Services code point
classifier for IPv4. dscp-ipv6—Differentiated Services code
point classifier for IPv6. exp—MPLS experimental bits classifier. ieee-802.1—IEEE-802.1 classifier. ieee-802.1ad—IEEE-802.1ad classifier. inet-precedence—Precedence classifier
for IPv4.
SRX3400, SRX3600, SRX5600, SRX5800: dscp—Differentiated Services code point
classifier for IPv4. dscp-ipv6—Differentiated Services code
point classifier for IPv6. ieee-802.1—IEEE-802.1 classifier. ieee-802.1ad—IEEE-802.1ad classifier. inet-precedence—Precedence classifier
for IPv4.
|
Code point mapping | Specifies the code point mapping created. The available options are as follows: Add—Click + to add a code
point mapping. Edit—Click pencil icon to edit the selected
code point mapping. Delete—Deletes the code point mapping.
|
Code point | Select the CoS value in bits and the alias of a classifier
from the list. |
Forwarding class | Select the forwarding class for the specified CoS value
and alias from the list. |
Loss priority | Select the loss priority for the specified CoS value
and alias from the list. |
Related Documentation
Help us to improve. Rate this article.
Feedback Received. Thank You!