Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

About the Source Page

You are here: Configure > Security Services > NAT > Source .

Use this page to configure source NAT.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 208 describes the fields on the Source Page.

Table 208: Fields on the Source Page.

Field

Description

Source NAT Rule Set

From

Displays the source NAT sort options from which the packets flow.

The options available are:

  • Routing Instance

  • Zone

  • Interface

To

Displays the source NAT sort options to which the packets flow.

The options available are:

  • Routing Instance

  • Zone

  • Interface

Filter

Displays the filter option.

Name

Displays the name of the source NAT rule set.

From

Displays the name of the routing instance, zone, or interface from which the packets flow.

To

Displays the name of the routing instance, zone, or interface to which the packets flow.

Rule

Displays the name of the rule in the selected source NAT rule set.

Description

Displays a description of the source NAT rule set.

Rules in Selected Rule-Set

Rule Name

Displays the name of the rule in the selected source NAT rule set.

Source Addresses

Displays the match source address.

Source Ports

Displays the match source ports.

Destination Addresses

Displays the match destination address.

Destination Ports

Displays the match destination port.

IP Protocol

Displays the match IP protocol.

Action

Displays the action of the rule.

Persistent

Displays the persistent NAT address in the source NAT pool

Upper Threshold

Displays the upper threshold value at which an SNMP trap is triggered.

Lower Threshold

Displays the lower threshold value at which an SNMP trap is triggered.

Description

Displays the description of the rule.

Source NAT Pool

Name

Displays the name of the source NAT pool.

Address

Displays the IP address of the source NAT pool.

Port

Displays the port address of the source NAT pool.

Description

Displays the description of the source NAT pool.

Upper Threshold

Displays the

Lower Threshold

Displays the

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit