Help Center User GuideGetting Started
User Guide
Getting Started

About the Application Tracking Page

You are here: Configure > Security Objects > Application Tracking.

Use this page to configure application tracking.

Field Description


To configure application tracking:

  1. Complete the configuration according to the guidelines provided in Table 180.
  2. Click Save to save the changes.

Table 180 describes the fields on the Application Tracking page.

Table 180: Fields on the Application Tracking Page



Application tracking

Select this option to enable application tracking.

Logging Type

Select an option.

  • Log as session(s) created—Generates a log message when a session is created. By default, this option is disabled.

  • Delay logging first session—Enables you to specify the length of time that must pass before the first log message is created. The default is 1 minute.

First Update Interval (min)

Use the up/down arrow to set the interval time.

Session Update Interval (min)

Use the up/down arrow to set the interval time.

Application Tracking By Zone

Lists the available zones.

  • To enable application tracking, select the zone and click the right arrow to move it to the tracking enabled list.

  • To disable application tracking, select the zone and then click the left arrow to move the zone back into the available list.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support