Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor RIP Information

You are here: Monitor > Routing > RIP Information.

Use this page to view RIP routing information, including a summary of RIP neighbors and statistics.

Table 58 describes the fields on the RIP Information page.

Table 58: Fields on the RIP Information Page

Field

Description

RIP Neighbors

Protocol Name

The RIP protocol name.

Port number

The port on which RIP is enabled.

Hold down time

The interval during which routes are neither advertised nor updated.

Global routes learned

Number of RIP routes learned on the logical interface.

Global routes hold down

Number of RIP routes that are not advertised or updated during the hold-down interval.

Global request dropped

Number of requests dropped.

Global responses dropped

Number of responses dropped.

RIP Statistics

Details

Tab used to view the details of the interface on which RIP is enabled.

Neighbor

Name of the RIP neighbor.

Note: This value is the name of the interface on which RIP is enabled. Click the name to see the details for this neighbor.

State

State of the RIP connection: Up or Dn (Down).

Source Address

Local source address.

This value is the configured address of the interface on which RIP is enabled.

Destination Address

Destination address.

This value is the configured address of the immediate RIP adjacency.

Send Mode

The mode of sending RIP messages.

Receive Mode

The mode in which messages are received.

In Metric

Value of the in coming metric configured for the RIP neighbor.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit