family (Compute Cluster)

Syntax

family inet {(address ip-address | dhcp);}

Hierarchy Level

[edit services app-engine compute-cluster compute-cluster-name compute-node compute-node-name interfaces bridge bridge-name],[edit services app-engine compute-cluster compute-cluster-name compute-node compute-node-name interfaces ethernet ethernet-interface-name],

Release Information

Statement introduced in Junos OS Release 12.3.

dhcp option introduced in Junos OS Release 13.2R1.

Description

Configure a static IP address or enable DHCP to get the IP addresses for management or data ports.

For a management interface, changing the family options in the platform configuration is destructive and requires a reboot of the compute node.

Options

address ip-address

Static IPv4 address (with prefix) of the network interface being configured. This option and the dhcp option are mutually exclusive.

dhcp

Enable the VSE devices’s management port and data ports IPv4 addresses to be assigned by DHCP. You can do one of the following:

  1. Enable DHCP for data ports.
  2. Enable DHCP for the management port.
  3. Enable DHCP for both the data and management ports.

This option and the address option are mutually exclusive.

family inet

Only the IPv4 protocol is supported.

Required Privilege Level

admin—To view this statement in the configuration.

admin-control—To add this statement to the configuration.

Related Documentation