Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Setting Baselines for Remote Access

    You can set baseline statistics using the baseline commands. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline when you retrieve baseline-relative statistics.

    Issue the delta keyword with the show aaa statistics command to show baselined statistics.

    1. Setting a Baseline for AAA Statistics
    2. Setting a Baseline for AAA Route Downloads
    3. Setting a Baseline for COPS Statistics
    4. Setting a Baseline for Local Address Pool Statistics
    5. Setting a Baseline for RADIUS Statistics
    6. Setting the Baseline for SRC Statistics

    Setting a Baseline for AAA Statistics

    Purpose

    Set a baseline for all AAA statistics.

    Action

    Issue the baseline aaa command:

    host1#baseline aaa

    There is no no version.

    Setting a Baseline for AAA Route Downloads

    Purpose

    Set a baseline for route downloads.

    Action

    • Issue the baseline aaa route-download command for IPv4 routes:
      host1#baseline aaa route-download
    • Issue the baseline aaa route-download ipv6 command for IPv6 routes:
      host1#baseline aaa route-download ipv6

    There is no no version.

    Setting a Baseline for COPS Statistics

    Purpose

    Set a baseline for COPS statistics.

    Action

    Issue the show cops statistics command:

    host1#show cops statistics

    There is no no version.

    Setting a Baseline for Local Address Pool Statistics

    Purpose

    Set a baseline for local address pool statistics.

    Action

    Issue the show local pool statistics command:

    host1#show local pool statistics

    There is no no version.

    Setting a Baseline for RADIUS Statistics

    Purpose

    Set a baseline for RADIUS statistics.

    Action

    Issue the show radius statistics command:

    host1#show radius statistics

    There is no no version.

    Setting the Baseline for SRC Statistics

    Purpose

    Set a baseline for SRC statistics.

    Action

    Issue the show sscc statistics command:

    host#1show sscc statistics

    There is no no version.

    Published: 2014-08-20