Monitoring PIM Router-Level Information for IPv6
Purpose
Display general PIM router-level information.
Action
To display general PIM router-level information:
host1:1#show ipv6 pim Default PIM Version: 2 Default Domain Id: 0 Default Hello Period: 30 Default Hello HoldTime: 105 Join-Prune Interval: 100 Join-Prune Holdtime: 350 Keepalive Period: 210 Assert Time: 210 Register Suppression Time: 60 Register Probe Time: 5 Register TTL: 64 SSM enabled, range default Sparse-Mode Graceful Restart Duration: 30 Graceful restart is complete (timer 0 seconds) Join filter, access-list bronze Designated Router Priority: 2
Meaning
Table 1 lists the show ipv6 pim command output fields.
Table 1: show ipv6 pim
Field Name | Field Description |
|---|---|
Default PIM Version | Default PIM version number (always 2) |
Default Domain Id | Default Domain Id (always 0) |
Default Hello period | Default interval (in minutes) at which the router sends hello messages to neighbors |
Default Hello Hold Time | Default time (in minutes) for which the router keeps the neighbor state alive |
Join-Prune Interval | Interval value (in seconds) set in the join/prune message originated by the PIM router |
Join-Prune Holdtime | Hold time value (in seconds) set in the join/prune message originated by the PIM router. The hold time is 3.5 times the PIM join/prune message interval value. |
Keepalive Period | Time SG join state is maintained in the absence of SG Join message |
Assert Time | Period after last assert before assert state is timed out |
Register Suppression Time | Period during which a designated router stops sending registers to the RP |
Register Probe Time | Time before register suppression time (RST) expires when a designated router might send a NULL-Register to the RP |
Register TTL | TTL value (in PIM register packets) originated by this PIM router |
SSM | State of SSM on this PIM router (enabled or disabled) |
range | Default SSM group range or name of the access list specifying the range |
Join filter | Name of the join filter access-list (if configured) for this PIM router |
Designated Router Priority | Designated router priority value |
