Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Monitoring Available IPv6 Routes for Reverse-Path Forwarding


    Display the IPv6 routes that the router can use for RPF. You can specify the IPv6 address and the network mask to view routes to a particular destination. You can use the detail keyword to view more detailed information about routes to a particular destination. You can specify a unicast routing protocol to view routes associated with that protocol.


    To display all IPv6 routes that the router can use for RPF:

    host1#show ipv6 rpf-route 
    Protocol/Route type codes:
      O- OSPF, E1- external type 1, E2- external type2,
      N1- NSSA external type1, N2- NSSA external type2
      L- MPLS label, V- VR/VRF, *- indirect next-hop
             Prefix/Length             Type    Dst/Met         Intf        
    -------------------------------- --------- ------- --------------------
    11:1:1:10::/60                   Static    1/0     ATM2/0.300          
    21:2:2:20::/60                   Static    1/0     ATM2/0.300          
    31:2:2:20::/60                   Connect   0/0     ATM2/0.300          
    131:1:1:10::/60                  Connect   0/0     ATM2/1.1300         
    1000::/64                        Static    1/0     ATM2/0.300         

    To display more detailed information about an IPv6 route to a particular destination:

    host1#show ipv6 rpf-route 1000::/64 detail
    1000::/64 Type:Static  Distance:1  Metric:0
            NextHop:31:2:2:23::2:3  IntfIndex 18  Intf ATM2/0.300


    Table 1 lists the show ipv6 rpf-route command output fields.

    Table 1: show ipv6 rpf-route Output Fields

    Field Name

    Field Description

    Protocol/Route type codes

    Protocol and route type codes for the table that follows


    Value of the logical AND of the IPv6 address of the destination network and the subnet address


    Length of the subnet mask in bits


    • Connect—Subnet directly connected to the interface
    • Static—Static route


    Distance configured for this route


    Learned or configured cost associated with this route


    Type of interface and interface specifier for the next hop. For details about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.

    Published: 2014-08-20