Monitoring the Protocol Statistics for the Mobile IP Home Agent
Traffic
Purpose
Display the protocol statistics for the Mobile IP home
agent traffic, including advertisements, solicitations, registrations,
registration errors, and security violations. Use the optional delta keyword to display the baseline-relative statistics
for the Mobile IP home agent traffic.
Action
To display the protocol statistics for the Mobile IP
home agent traffic:
host1#show ip mobile traffic
Home Agent Registrations:
Registration requests:
Register: 0
Copyright © 2012, Juniper Networks, Inc. 321
Chapter 14: Configuring the Mobile IP Home Agent
Deregister: 0
Accept: 0
Registration rejects:
Denied: 0
Unspecified: 0
Unknown HA: 0
Administratively prohibited: 0
No Resources: 0
Authentication failed MN: 0
FA: 0
Bad identification: 0
Bad request form: 0
Unavailable encapsulation: 0
No reverse tunnel: 0
Meaning
Table 1 lists the output
fields for the show ip mobile traffic command.
Table 1: show ip mobile traffic Output Fields
Field Name | Field Description |
---|
Registration requests | Total number of registration requests, de-registration
requests, and accepted registration requests for mobile nodes: - Register—Number of registration requests received
by the Mobile IP home agent
- Deregister—Number of de-registration requests received
by the Mobile IP home agent
- Accept—Number of registration requests accepted
by the Mobile IP home agent
|
Registration rejects | Total number of and reasons for unsuccessful responses
to registration requests: - Denied—Number of registration requests denied by
the Mobile IP home agent
- Unspecified—Number of registration requests rejected
for an unspecified reason, such as an internal communication failure
- Unknown HA—Number of registration requests rejected
because of an unknown Mobile IP home agent address, or because the
specified Mobile IP home agent address is not serviced by this Mobile
IP home agent
- Administratively prohibited—Number of registration
requests prohibited for administrative reasons, such as the broadcast
or B bit being set without the corresponding D bit, or a denial by
the registration filters
- No Resources—Number of registration requests rejected
due to insufficient resources, such as a full binding table, an inability
to create a tunnel, or an inability of the IP subscriber management
application to create a dynamic subscriber interface
- Authentication failed MN—Number of registration
requests rejected because the mobile node failed authentication
- FA—Number of registration requests rejected because
the foreign agent failed authentication
- Bad identification—Number of registration requests
rejected because the registration ID field is out of range
- Bad request form—Number of registration requests
rejected because of a malformed request
- Unavailable encapsulation—Number of registration
requests rejected because of unsupported encapsulation
- No reverse tunnel—Number of registration requests
rejected because reverse tunneling is disabled
|
Published: 2014-08-12