Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Monitoring Configured Tunnel Groups with AAA

    Purpose

    Display the currently configured tunnel groups.

    Action

    To display information about currently configured tunnel groups:

    host1#show aaa tunnel-group
    
    Tunnel Group: boston
    Tunnel                 Tunnel   Tunnel   Tunnel    Tunnel
     Tag     Tunnel Peer   Source    Type    Medium   Password    Tunnel Id
    ------   -----------   ------   ------   ------   --------   -----------
    3        192.168.1.1   <null>   l2tp     ipv4     msn        <null>
                           Tunnel                 Tunnel
    Tunnel     Tunnel      Server     Tunnel       Max
     Tag     Client Name    Name    Preference   Sessions     Tunnel RWS
    ------   -----------   ------   ----------   --------   --------------
    3        msn.del.com   <null>   2000         0          4             
                                               Tunnel
             Tunnel     Tunnel      Tunnel       Tx
    Tunnel   Virtual   Failover     Switch     Speed
     Tag     Router     Resync     Profile     Method
    ------   -------   --------   ---------    ------
    3        <null>    <null>      sanjose     qos

    Meaning

    Table 1 lists the show aaa tunnel-group command output fields.

    Table 1: show aaa tunnel-group Output Fields

    Field Name

    Field Description

    Domain

    Name of the domain

    router-name

    Virtual router to which user domain name is mapped

    router-mask

    IPv4 mask of the local interface

    tunnel-group

    Name of the tunnel group assigned to the domain map

    ipv6-router-name

    IPv6 virtual router to which user domain name is mapped

    local-interface

    Interface information to use on the local (E Series) side of the subscriber’s interface

    ipv6-local-interface

    IPv6 interface information to use on the local (E Series) side of the subscriber’s interface

    poolname

    Local address pool from which the router allocates addresses for this domain

    IP hint

    IP hint is enabled

    strip-domain

    Strip domain is enabled

    override-username

    Single username used for all users from a domain in place of the values received from the remote client

    override-password

    Single password used for all users from a domain in place of the values received from the remote client

    Tunnel Tag

    Tag that identifies the tunnel

    Tunnel Peer

    Destination address of the tunnel

    Tunnel Source

    Source address of the tunnel

    Tunnel Type

    L2TP

    Tunnel Medium

    Type of medium for the tunnel; only IPv4 is supported

    Tunnel Password

    Password for the tunnel

    Tunnel Id

    ID of the tunnel

    Tunnel Client Name

    Host name that the LAC sends to the LNS when communicating to the LNS about the tunnel

    Tunnel Server Name

    Host name expected from the peer (the LNS) when during tunnel startup

    Tunnel Preference

    Preference level for the tunnel

    Tunnel Max Sessions

    Maximum number of sessions allowed on a tunnel

    Tunnel RWS

    L2TP receive window size (RWS) for a tunnel on the LAC; displays either the configured value or the default behavior, which is indicated by system chooses (that is, the RWS value is set as 64)

    Tunnel Virtual Router

    Name of the virtual router to map to the user domain name

    Tunnel Failover Resync

    L2TP peer resynchronization method

    Field descriptions

    The actual fields displayed depend on your configuration

    Tunnel Switch Profile

    Name of the L2TP tunnel switch profile

    Tunnel Tx Speed Method

    Method that the router uses to calculate the transmit connect speed of the subscriber’s access interface: static layer2, dynamic layer2, qos, actual, not set

     

    Related Documentation

     

    Published: 2014-08-20