Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Monitoring the Routing Table

    Purpose

    Display the current state of the routing table, including routes not used for forwarding. An Access-P entry in the Type column of the output indicates routes that are downloaded by the RADIUS route-download server.

    Action

    To display information in the routing table:

    host1#show ip route
    Protocol/Route type codes:
      I1- ISIS level 1, I2- ISIS level2,
      I- route type intra, IA- route type inter, E- route type external,
      i- metric type internal, e- metric type external,
      P- periodic download, O- OSPF, E1- external type 1, E2- external type2,
      N1- NSSA external type1, N2- NSSA external type2
      L- MPLS label, V- VRF, *- via indirect next-hop
    Prefix/Length      Type       Next Hop      Dst/Met          Interface
    ------------------ --------- --------------- ---------- -----------------
    0.0.0.0/0          Static    10.13.10.1      1/0        FastEthernet6/0/0 
    192.168.10.0/23    Connect   10.13.10.187    0/0        FastEthernet6/0/0 
    192.168.21.21/32   Access-P  255.255.255.255 254/2      null0 
    192.168.22.22/32   Access-P  255.255.255.255 254/2      null0 
    192.168.23.23/32   Access-P  255.255.255.255 254/2      null0 
    192.168.24.24/32   Access-P  255.255.255.255 254/2      null0 

    Meaning

    Refer to the description of the show ip route command in JunosE IP, IPv6, and IGP Configuration Guide for additional information about the show ip route command.

     

    Related Documentation

     

    Published: 2014-08-20