Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Monitoring an IP Profile

    Purpose

    Display information about a specific IP profile.

    Action

    To display information about a specific IP profile:

    host1#show ip profile foo
    IP profile : foo
    IP address                 : none
    Unnumbered interface       : none
    Router                     :
    Directed Broadcast         : Enabled
    ICMP Redirects             : Disabled
    Access Route Addition      : Enabled
    Network Address Translation: Enabled, domain inside
    Source-Address Validation  : Enabled
    Ignore DF Bit              : Disabled
    Administrative MTU         : 0 
    Auto Detect                : Disabled
    Auto Configure             : Disabled
    Auto Detect                : Disabled
    IP FlowStats               : Enabled

    Meaning

    Table 1 lists the show ip profile command output fields.

    Table 1: show ip profile Output Fields

    Field Name

    Field Description

    IP profile

    Profile name

    IP address

    IP address and subnet mask of the interface or none if the interface is unnumbered

    Unnumbered interface

    Specifier for the unnumbered interface or none if the interface is numbered

    Router

    Router name

    Directed Broadcast

    Directed broadcast forwarding feature status: Enabled or disabled

    ICMP Redirects

    ICMP redirect feature status: Enabled or disabled

    Access Route Addition

    Access route feature status: Enabled or disabled

    Network Address Translation

    Enable or disable; domain location (inside or outside)

    Source-Address Validation

    Source address validation feature status: Enabled or disabled

    Ignore DF Bit

    Ignoring DF bit usage: Enabled or disabled

    Administrative MTU

    MTU size

    Auto Detect

    Router automatically detects packets that do not match any entries in the demultiplexer table; enabled or disabled

    Auto Configure

    Dynamic creation of subscriber interfaces on a primary IP interface; enabled or disabled

    IP FlowStats

    Enabled or disabled

    Published: 2014-08-13