Monitoring the Redundancy Status of Applications
Purpose
Display the redundancy status of the applications.
Action
To display the applications that do not support high availability.
host1#show redundancy clients
Unsupported High Availability Clients
-------------------------------------
client configuration
--------------------- -------------
DHCP Proxy Client safe
Global Ipv6 safe
IPsec Transport (ITM) safe
l2tpDialoutGenerator safe
DHCPv6 Local Server safe
Radius Relay Server safeYou can also display the redundancy status information of all clients. Specifies whether the client supports high availability and also the safety level of configuration. For instance, if an unsupported client is configured on a router with high availability enabled, the configuration reads “unsafe”.
host1#show redundancy clients all
High Availability Client Information
------------------------------------
client mode configuration
--------------------- ----------- -------------
atm1483DataService supported safe
AA83 supported safe
aaaServer supported safe
atmAal5 supported safe
AAQS supported safe
atm supported safe
Bridged Ethernet supported safe
Transparent Bridging supported safe
dcm supported safe
dhcpExternal supported safe
DHCP Proxy Client unsupported safe
DS1 supported safe
DS3 supported safe
ethernet supported safe
Flow Inspection supported safe
frameRelay supported safe
FT1 supported safe
Global Ipv6 unsupported safe
Global Ip supported safe
HDLC supported safe
IKEP supported safe
ipflowstats supported safe
IpSubscriberManager supported safe
IPTU supported safe
IPVR supported safe
IPsec Transport (ITM) unsupported safe
l2tpDialoutGenerator unsupported safe
l2tp supported safe
LMGR supported safe
DHCPv4 Local Server supported safe
DHCPv6 Local Server unsupported safe
MPLS supported safe
PMGR supported safe
pppoe supported safe
ppp supported safe
qos supported safe
Radius Relay Server unsupported safe
RSVP supported safe
SCM supported safe
slotHelper supported safe
Cisco HDLC supported safe
ServiceManager supported safe
Sonet supported safe
SonetPath supported safe
SonetVT supported safe
IPsec Tunnel (ST) supported safeMeaning
Table 1 lists the show redundancy clients command output fields.
Table 1: show redundancy clients Output Fields
Field Name | Field Description |
|---|---|
client | High availability client. |
mode | High availability status of the client. Possible values: supported or unsupported. |
Configuration | Safety level of the configuration based on whether or not the client is supported or unsupported and in case of those unsupported, whether or not the client has been configured. For example, if an unsupported client has been configured on a router with high availability enabled, the configuration reads “unsafe”. |
