Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Monitoring the Characteristics of a Profile Assigned to Dynamic Interfaces

    Purpose

    Display information about profiles. You can use the name keyword to display information about a specific profile. You can use the brief keyword to display a list of profiles configured on the router.

    Action

    To display configuration information for a profile assigned to a dynamic interface:

    host1#show profile name pppoe
    PPP Keepalive               : 30
    PPP Magic Number            : enabled
    PPP Magic Number Mismatch   :reject 
    PPP Peer DNS Priority       : disabled
    PPP Peer WINS Priority      : disabled
    PPP Authentication          : 
    PPP Authentication Router   :
    PPP Negotiate MRU           : (use lower layer MRU)
    PPP Packet Log              : disabled
    PPP State Log               : disabled
    PPP Chap Challenge Length   : 16 - 32
    PPP Passive Mode            : disabled
    PPP Multilink               : disabled
    PPP IPCP Netmask Option     : disabled
    PPP IPCP Lockout Option     : disabled
    PPP IPCP Lockout            : disabled
    PPP AAA Profile             :
    PPP Multilink Fragmentation : disabled
    PPP Multilink Fragment Size : (use MTU)
    PPP Multilink Reassembly    : disabled
    PPP Multilink Mrru          : (use MRU)
    PPP Hash Link Selection     : disabled
    PPP Initiate IP             : disabled
    PPP Initiate IPv6           : disabled
    PPP Max-negotiations LCP    : 30
    PPP Max-negotiations IPCP   : 30
    PPP Max-negotiations IPv6CP : 30
    PPP IPCP prompt-option DNS  : enabled
    PPP Multilink Multiclass    : disabled
    PPP Multilink Multiclasses  : 0
    PPP Ipcp Max Negotiation    : 6
    PPP Ipcp Negotiation time   : 60
    PPP Ipcp Lockout time       : 600
    PPP broadcast Accounting Group Name     : groupxyz
    PPP Client Username          :
    PPP Client Password         :
    PPP Client Authentication   :
    PPP Client Ip Address       : 0.0.0.0
    PPP Client Primary Dns Address   : 0.0.0.0
    PPP Client Secondary Dns Address   : 0.0.0.0
    PPP Client Primary Wins Address   : 0.0.0.0
    PPP Client Secondary Wins Address   : 0.0.0.0
    

    To display configuration information for a base profile assigned to a dynamic ATM 1483 subinterface:

    host1#show profile name atm1483BaseProfile
    ATM1483 Auto-configure ip                 : disabled
    ATM1483 Auto-configure bridgedEthernet    : disabled
    ATM1483 Auto-configure ppp                : enabled
    ATM1483 lockout (seconds) ppp             : range : 1-300
    ATM1483 Auto-configure pppoe              : enabled
    ATM1483 lockout (seconds) pppoe           : range : 1-300
    ATM1483 PVC circuit type         :  aal5autoconfig
    ATM1483 PVC service category     :  Nrt-Vbr
    ATM1483 PVC Peak rate : 10000, Avg rate : 2000, Burst size : 500
    ATM1483 Description              :  VC_atm1483 
    ATM1483 Advisory Rx Speed        :  2000000000 
    
    
    ATM1483 PVC OAM Administrative status: enabled
    ATM1483 PVC OAM Loopback frequency:    30
    ATM1483 Ip Subscriber information: 
      user             : elaine
      domain           : jpeterman.com
      password         : putty
    ATM1483 IP Profile               : none assigned
    ATM1483 Bridged Ethernet Profile : none assigned
    ATM1483 PPP Profile              : none assigned
    ATM1483 PPPoE Profile            : pppoeProfile

    To display configuration information for a base profile assigned to a dynamic VLAN subinterface:

    host1#show profile name vlanProfile 
    VLAN Auto-configure ip             : enabled
    VLAN Auto-configure pppoe          : enabled
    VLAN Svlan Ethertype               : auto-configure
    VLAN Advisory Rx Speed             : 100 Kbps
    VLAN Advisory Tx Speed             : 2500 Kbps
    VLAN Description                   : testing
    VLAN IP Profile                    : ipProfile
    VLAN PPPoE Profile                 : pppoeProfile
    VLAN Service Profile               : none assigned 
    Bridged Ethernet Mtu               : 1971 
    Bridged Ethernet Service Profile   : eastServiceProfile 
    

    To display profile configuration information related to IPv6 Neighbor Discovery router advertisements:

    host1#show profile name ipv6Profile 
    IPv6 Unnumbered interface  : loopback 0
    IPv6 Router                : default
    IPv6 Src-Addr Validation   : Disabled
    IPv6 Administrative MTU    : 0
    IPv6 ND Enabled            : Enabled
    IPv6 ND ManagedConfig      : Disabled
    IPv6 ND OtherConfig        : Enabled
    IPv6 ND SuppressRa         : Disabled
    IPv6 ND RaInterval         : 50
    IPv6 ND RaLifeTime         : 1800
    IPv6 ND ReachableTime      : 0
    IPv6 ND RaPrefix           : 1234::/64
    IPv6 ND ValidLifetime      : 60
    IPv6 ND PreferredLifetime  : 60
    IPv6 ND PrefixOnLink       : Enabled
    IPv6 ND PrefixAutoConfig   : Enabled
    IPv6 http redirect Url     : http://www.google.com

    Meaning

    Table 1 lists the show profile command output fields.

    Table 1: show profile Output Fields

    Field Name

    Field Description

    Profile

    Name of the profile that is displayed

    IP address

    IP address and subnet mask of the interface, or none if the interface is unnumbered

    Unnumbered interface

    Specifier for the unnumbered interface, or none if the interface is numbered

    Router

    Name of the virtual router assigned to the profile; interfaces created by the profile are attached to this virtual router

    Directed Broadcast

    Enabled or disabled

    ICMP Redirects

    Enabled or disabled

    Access Route Addition

    Enabled or disabled

    Network Address Translation

    Enabled or disabled; domain location (inside or outside)

    Source-Address Validation

    Enabled or disabled

    Ignore DF Bit

    Enabled or disabled

    Filter Option Packets

    Router filters out packets with IP options; enabled or disabled

    Administrative MTU

    MTU size configured on the profile

    TCP MSS value

    Maximum segment size for TCP SYN packets traveling through the interface

    Inactivity Timer

    Inactivity timer setting; enabled or disabled

    Route Map Name

    Route map applied to the IP interface subscriber; enabled or disabled

    Auto Detect

    Router automatically detects packets that do not match any entries in the demultiplexer table; enabled or disabled

    Auto Configure

    Dynamic creation of subscriber interfaces on a primary IP interface; enabled or disabled

    IGMP

    Enabled or disabled

    static-groups

    Displays address of any static groups configured for IGMP

    Input policy

    Name of input policy and whether statistics are enabled or disabled

    Output policy

    Name of output policy and whether statistics are enabled or disabled

    PPP Keepalive

    PPP keepalive period, in seconds

    PPP Magic Number

    Enabled or disabled

    PPP Magic Number Mismatch

    Indicates whether the router is configured to ignore the LCP peer magic number and retain the PPP connection when the peer has not negotiated an LCP magic number: ignore (ignore the peer magic number mismatch and retain the PPP connection), or reject (router terminates the PPP connection if it detects a peer magic number mismatch)

    PPP Peer DNS Priority

    Enabled or disabled

    PPP Peer WINS Priority

    Enabled or disabled

    PPP Authentication

    Type of authentication configured: PAP, CHAP, or none

    PPP Authentication Router

    Name of authentication virtual router

    PPP Negotiate MRU

    MRU configured for the profile

    PPP Packet Log

    Enabled or disabled

    PPP State Log

    Enabled or disabled

    PPP Chap Challenge Length

    Minimum and maximum Chap Challenge length

    PPP Passive Mode

    Enabled or disabled

    PPP Multilink

    Enabled or disabled

    PPP IPCP Netmask Option

    Enabled or disabled

    PPP IPCP Lockout Option

    Enabled or disabled

    PPP Max-negotiations IPCP

    Maximum number of renegotiation attempts that the router accepts before terminating a PPP session

    PPP AAA Profile

    AAA profile associated with this PPP interface

    PPP Multilink Fragmentation

    Enabled or disabled

    PPP Multilink Fragment Size

    Multilink fragment size for this PPP interface

    PPP Multilink Reassembly

    Enabled or disabled

    PPP Multilink Mrru

    Multilink MRRU value for this PPP interface

    PPP Hash Link Selection

    Hash-based link selection for a PPP interface; enabled or disabled

    PPP Initiate IP

    Initiation of IPv4 over this PPP interface; enabled or disabled

    PPP Initiate IPv6

    Initiation of IPv6 over this PPP interface; enabled or disabled

    PPP IPCP prompt-option dns

    Prompts the CPE (Customer Premises Equipment) to negotiate the IPCP primary and secondary DNS options that are locally available with the broadband remote access server; enabled or disabled

    PPP Multilink Multiclass

    Configuration of multiclass MLPPP on the MLPPP interface: enabled or disabled

    PPP Multilink Multiclasses

    Number of multilink classes created on the MLPPP interface: 1 through 8

    PPP Ipcp Max Negotiation

    Maximum number of successful IPCP renegotiations for IPv4 addresses that the router can receive per subscriber: 3 through 6

    PPP Ipcp Negotiation time

    Time period during which IPCP renegotiations for IPv4 addresses that the router or the provider edge device can receive from a subscriber are restricted: 60 through 600 seconds

    PPP Ipcp Lockout time

    Time period during which additional IPCP negotiations are prevented: 300 through 600 seconds

    PPP broadcast Accounting Group Name

    Name of the broadcast virtual router group associated with this PPP profile

    PPPoE Max Sessions

    Maximum number of PPPoE subinterfaces that can be on an interface

    PPPoE Always-offer

    Router offers to set up a session for the client, even if the router has insufficient resources to establish a session; enabled or disabled

    PPPoE Remote-Circuit-Id

    The router captures and processes a vendor-specific tag containing a remote circuit ID transmitted from a digital subscriber line access multiplexer; enabled or disabled

    PPPoE Log PPPoeControlPacket

    Enabled or disabled

    PPPOE duplicate-protect

    Enabled or disabled

    PPPoE ACNAME

    Access concentrator name

    PPPoE URL

    URL sent in PADM message to PPPoE clients

    PPPoE MOTM

    Message of the minute sent in the PADM message to PPPoE clients

    PPPoE Service-Name Table

    Name of the PPPoE service name table, if configured for the specified profile

    ATM1483 Auto-configure

    Whether autodetection of the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE) is enabled or disabled for a dynamic ATM 1483 subinterface

    ATM1483 lockout (seconds)

    Encapsulation type lockout setting for the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE) configured on a dynamic ATM 1483 subinterface:

    • range—Minimum lockout time–maximum lockout time, in seconds
    • no lockout—Encapsulation type lockout is disabled

    ATM1483 PVC circuit type

    Encapsulation setting for the PVC configured on a dynamic ATM 1483 subinterface:

    • aal5autoconfig—Enables autodetection of the 1483 encapsulation (LLC/SNAP or VC multiplexed)
    • aal5mux ip—VC-based multiplexed circuit for IP only
    • aal5snap—LLC encapsulated circuit; the LLC/SNAP header precedes the protocol datagram

    ATM1483 PVC service category

    Service type setting for the PVC configured on a dynamic ATM 1483 subinterface: UBR (the default), UBR PCR, NRT-VBR, RT-VBR, or CBR

    ATM1483 PVC Peak rate

    Peak cell rate, in Kbps, for the PVC configured on a dynamic ATM 1483 subinterfaces

    ATM1483 PVC Avg rate

    Average rate, in Kbps, for the PVC configured on a dynamic ATM 1483 subinterface; also referred to as sustained cell rate

    ATM1483 PVC Burst size

    Length in cells of the burst for the PVC configured on a dynamic ATM 1483 subinterface; also referred to as maximum burst size

    ATM1483 Description

    Text description assigned to ATM 1483 subinterfaces that are created with this profile

    ATM1483 Advisory Rx Speed

    Configured receive speed, in Kbps, for the dynamic ATM 1483 subinterface. The E Series LAC sends this value to the LNS in the RX Connect-Speed AVP [38].

    ATM1483 PVC OAM Administrative status

    Status of OAM F5 loopback cell generation (for VC integrity) on a circuit created with this profile: enabled or disabled

    ATM1483 PVC OAM Loopback frequency

    Number of seconds between transmissions of OAM F5 end-to-end loopback cells on a circuit created with this profile

    ATM1483 Ip Subscriber information

    Subscriber login information for the specified dynamic interface type

    ATM1483 Profile

    Name of the profile assigned to the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE); these profiles are referenced in the base profile for a dynamic ATM 1483 subinterface as nested profile assignments

    VLAN Auto-configure

    Whether auto detection of the specified upper-interface encapsulation type (IP or PPPoE) is enabled or disabled for a dynamic VLAN subinterface

    VLAN Advisory Rx Speed

    Configured advisory receive speed, in Kbps, for the dynamic VLAN subinterface; the E Series LAC sends this value to the LNS in the RX Connect-Speed AVP [38]

    VLAN Advisory Tx Speed

    Configured advisory speed, in Kbps, for the dynamic VLAN subinterface.

    VLAN Description

    Text description assigned to VLAN subinterfaces that are created with this profile

    VLAN Profile

    Name of the profile assigned to the specified upper-interface encapsulation type (IP or PPPoE); these profiles are referenced in the base profile for a dynamic VLAN subinterface as nested profile assignments

    VLAN Service Profile

    Service profile name for a VLAN

    VLAN Svlan Ethertype

    Ethertype that the packet must use this to create the dynamic VLAN subinterface

    Bridged Ethernet Mtu

    MTU size configured for a dynamic bridged Ethernet interface

    Bridged Ethernet Service Profile

    Name of the IP service profile associated with the interface profile for this dynamic bridged Ethernet interface

    IPv6 http redirect Url

    URL to which a subscriber’s initial web browser session is redirected

    IPv6 Unnumbered interface

    Name of interface without a specific address

    IPv6 Router

    Router name or default

    IPv6 Src-Addr Validation

    Source-Address Validation; enabled or disabled

    IPv6 Administrative MTU

    MTU size

    IPv6 ND Enabled

    State of the Neighbor Discovery; enabled or disabled

    IPv6 ND ManagedConfig

    State of the Neighbor Discovery router advertisement managed flag; enabled or disabled

    IPv6 ND OtherConfig

    State of the Neighbor Discovery router advertisement other config flag; enabled or disabled

    IPv6 ND SuppressRa

    Status IPv6 router advertisement suppression; enabled or disabled

    IPv6 ND RaInterval

    Interval (in seconds) of the Neighbor Discovery router advertisement

    IPv6 ND RaLifeTime

    Lifetime (in seconds) of the Neighbor Discovery router advertisement

    IPv6 ND ReachableTime

    Amount of time (in milliseconds) that the neighbor is expected to remain reachable

    IPv6 ND RaPrefix

    Configured prefixes for Neighbor Discovery router advertisement

    IPv6 ND ValidLifetime

    Amount of time (in seconds) that the router advertises the IPv6 prefix as valid

    IPv6 ND PreferredLifetime

    Amount of time (in seconds) that the router advertises the specified IPv6 prefix as preferred

    IPv6 ND PrefixOnLink

    State of the on-link flag; enabled or disabled

    IPv6 ND PrefixAutoConfig

    State of the use the specified prefix for IPv6 autoconfiguration; enabled or disabled

    Published: 2014-08-14