Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Monitoring Bulk-Configured VC Ranges on an ATM AAL5 Interface

    Purpose

    Display information, including base profile assignments and overriding profile assignments, for the bulk-configured VC ranges on an ATM AAL5 interface. You can display information for all VC ranges on the router by using the show atm bulk-config command with no keywords.

    To display information for all VC ranges on a specified ATM AAL5 interface, use the show atm bulk-config command with the atm keyword and interface specifier.

    For information about a particular VC range on a specified ATM AAL5 interface, use the show atm bulk-config command with the atm keyword and interface specifier and the name keyword.

    You can display information only about overriding profile assignments configured for specific ATM PVCs within bulk-configured VC subranges by using the show atm bulk-config command with the override keyword. When you specify the override keyword, the command does not display information about base profile assignments.

    Action

    To display information about base profile assignments and overriding profile assignments for all bulk-configured VC ranges on the router, use the show atm bulk-config command with no keywords. The VC range named test consists of a single VC subrange (1, 1, 101, 200), has a base profile named atm1483BaseProfile assigned, and has an overriding profile named overrideProfile1 assigned to two ATM PVCs within the VC subrange. The VC range named test2 is a placeholder range that has no VC subranges configured and no base profile assigned:

    host1#show atm bulk-config
    
                  Bulk
                 Config Start End Start End                    Admin
     Interface    Name   VPI  VPI  VCI  VCI  Assigned Profile  State
    ------------ ------ ----- --- ----- --- ------------------ -----
    ATM AAL5 3/0   test     1   1   101 200 atm1483BaseProfile    up
    ATM AAL5 3/2  test2    --  --   --- ---      none assigned   ---
    2 bulk configuration(s) found
    Profile override(s):
                  Bulk
                 Config
     Interface    Name  VPI VCI Assigned Profile Status
    ------------ ------ --- --- ---------------- ------
    ATM AAL5 3/0   test   1 151 overrideProfile1 Active
    ATM AAL5 3/0   test   1 161 overrideProfile1 Active
    2 profile override(s) found

    To display information about base profile assignments and overriding profile assignments for all VC ranges configured on a specified ATM AAL5 interface:

    host1#show atm bulk-config atm 3/0
    
                  Bulk
                 Config Start End Start End                    Admin
     Interface    Name   VPI  VPI  VCI  VCI  Assigned Profile  State
    ------------ ------ ----- --- ----- --- ------------------ -----
    ATM AAL5 3/0   test     1   1   101 200 atm1483BaseProfile    up
    1 bulk configuration(s) found
    Profile override(s):
                  Bulk
                 Config
     Interface    Name  VPI VCI Assigned Profile Status
    ------------ ------ --- --- ---------------- ------
    ATM AAL5 3/0   test   1 151 overrideProfile1 Active
    ATM AAL5 3/0   test   1 161 overrideProfile1 Active
    2 profile override(s) found

    To display information about base profile assignments and overriding profile assignments for a particular bulk-configured VC range:

    host1#show atm bulk-config name test
    
                  Bulk
                 Config Start End Start End                    Admin
     Interface    Name   VPI  VPI  VCI  VCI  Assigned Profile  State
    ------------ ------ ----- --- ----- --- ------------------ -----
    ATM AAL5 3/0   test     1   1   101 200 atm1483BaseProfile    up
    1 bulk configuration(s) found
    Profile override(s):
                  Bulk
                 Config
     Interface    Name  VPI VCI Assigned Profile Status
    ------------ ------ --- --- ---------------- ------
    ATM AAL5 3/0   test   1 151 overrideProfile1 Active
    ATM AAL5 3/0   test   1 161 overrideProfile1 Active
    2 profile override(s) found

    To display information only about overriding profile assignments for all bulk-configured VC ranges on the router:

    host1#show atm bulk-config override
    
    Profile override(s):
                  Bulk
                 Config
     Interface    Name  VPI VCI Assigned Profile Status
    ------------ ------ --- --- ---------------- ------
    ATM AAL5 3/0   test   1 151 overrideProfile1 Active
    ATM AAL5 3/0   test   1 161 overrideProfile1 Active
    2 profile override(s) found

    To display information only about overriding profile assignments for a particular VC range configured on a specified ATM AAL5 interface:

    host1#show atm bulk-config atm 3/0 override
    
    Profile override(s):
                  Bulk
                 Config
     Interface    Name  VPI VCI Assigned Profile Status
    ------------ ------ --- --- ---------------- ------
    ATM AAL5 3/0   test   1 151 overrideProfile1 Active
    ATM AAL5 3/0   test   1 161 overrideProfile1 Active
    2 profile override(s) found

    Meaning

    Table 1 lists the output fields for the show atm bulk-config command.

    Table 1: show atm bulk-config Output Fields

    Field Name

    Field Description

    Interface

    Identifier of the ATM AAL5 physical interface on which the bulk-configured VC range resides. For more information about specifying the ATM interface, see Interface Types and Specifiers in the JunosE Command Reference Guide.

    Bulk Config Name

    Name of the bulk-configured VC range on this interface

    Start VPI

    Starting virtual path identifier (inclusive) of the VC subrange

    End VPI

    Ending virtual path identifier (inclusive) of the VC subrange

    Start VCI

    Starting virtual circuit identifier (inclusive) of the VC subrange

    End VCI

    Ending virtual circuit identifier (inclusive) of the VC subrange

    Assigned Profile

    Base profile name for the dynamic ATM 1483 subinterface assigned to this VC subrange with Assigning an Overriding Profile to a Single ATM PVC that Exists Within a Bulk-Configured VC Subrange. When no profile is assigned to the VC subrange, the field displays none assigned.

    Admin State

    Administrative state of the VC subrange: up or down

    Profile override(s)

    When overriding profile assignments are configured on the router, the command displays the following fields:

    • Interface—Identifier of the ATM AAL5 physical interface
    • Bulk Config Name—Name of the bulk-configured VC range on this interface that includes the VC subrange encompassing the specified ATM PVC
    • VPI—Virtual path identifier of the PVC within the bulk-configured VC subrange
    • VCI—Virtual circuit identifier of the PVC within the bulk-configured VC subrange
    • Assigned Profile—Name of the overriding profile assigned to the specified PVC with Assigning an Overriding Profile to a Single ATM PVC that Exists Within a Bulk-Configured VC Subrange
    • Status—Operational status of the overriding profile assignment: Active or Inactive. Active indicates that the router uses the overriding profile to create dynamic interface columns because no static ATM circuits with the same VPI/VCI values exist on this interface. Inactive indicates that the router does not use the overriding profile to create dynamic interface columns because a static ATM circuit with the same VPI/VCI values exists on this interface.

    Published: 2014-08-14