Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    Monitoring DVMRP Parameters for a Specific Interface


    Display DVMRP parameters for a specified interface.


    To display DVMRP parameters for a specified interface:

    host1:v3#show ip dvmrp interface
    Interface: ATM2/0.1
          Received Bad Packets:                      0
          Received Bad Routes:                       0
          Routes Sent:                               0
          Administrative State:                Enabled
          Summary Address(es)          None Configured
          auto-summary:                        Disabled
          metric-offset in:                          1
          metric-offset out:                         0
          announce-filter:                        None
          accept-filter(s)             None Configured

    To display a summary of DVMRP parameters for a specified interface:

    host1:boston#show ip dvmrp interface brief
      Interface          SourceAddress   Network/Mask    RBdPk RBdRt SntRt
      atm5/0.14         0     0     2
      atm5/0.15         0     0     2


    Table 1 lists the show ip dvmrp interface command output fields.

    Table 1: show ip dvmrp interface Output Fields




    Type and specifier of the interface connected to a source. For details about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.


    IP address of the interface or, for an unnumbered interface, address of the loopback interface


    Network and mask of the subnet on which the interface resides

    Received Bad Packets/RBdPk

    Number of bad packets received on this interface

    Received Bad Routes/RBdRt

    Number of bad routes received on this interface

    Routes Sent/SntRt

    Number of bad routes advertised on this interface

    Administrative State

    Configured state of DVMRP on this interface: enabled or Disabled

    Summary Address(es)

    Specific summary address or addresses that this interface should advertise


    Status of automatic summarization: Enabled or Disabled

    metric-offset in

    Number of hops by which the router increases a DVMRP route advertised in incoming DVMRP reports

    metric-offset out

    Number of hops by which the router increases a DVMRP route advertised in outgoing DVMRP reports


    Routes advertised by the interface


    Names of IP access lists that specify the sources for which the interface accepts routes


    Related Documentation


    Published: 2014-08-19