TechLibrary

Navigation

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Monitoring the Bulks Statistics Data Collection Configuration

Purpose

Display the bulk statistics data collection configuration.

Action

To display the bulk statistics data collection configuration:

host1#show bulkstats

  AdminStatus:  enabled
  OperStatus:   enabled
  Interface Description Setting: industry-common
  File Format: CR+LF 
Current Time: TUE AUG 15 2002 15:54:20 UTC

  Intervals PrimaryXfers PrimaryFails SecondaryXfers SecondaryFails
  --------- ------------ ------------ -------------- --------------
  0         0            0            0              0

  BulkStats Collector Information:
  Index  CurrSize  MaxSize   Intrvl  Mode      XferMode  State
  -----  --------  --------  ------  --------- --------  -------
  1      490       3670016   600     periodic  manual    inProg
  2      0         3670016   360     periodic  manual    notReady

  Index  Primary-Receiver  Second-Receiver  Last Transfer Failure
  -----  ----------------  ---------------  --------------------
  1      1                 not defined
  2      not defined       not defined

  Index Interval Start Time          Interval Stop Time
  ----- ---------------------------- -------------------------
  1     TUE AUG 15 2000 15:52:33 UTC TUE AUG 15 2000 16:02:33 UTC
  2     Not started                  N/A

Schema Information:
  Index  Subtree
  -----  -------------------------------------------------
  1      ifStats

  Index  CollectorIndex  State
  -----  --------------  --------
  1      1               active

  Index  Create-Delete Time Stats  Create-Delete Interface Types
  -----  ------------------------  -----------------------------
  1      enabled                   IP

  Index  Subtree List
  -----  -------------------------------------------------------------
  1      all

  Interface Types:
  Index         Type             CollectorIndex  State
  -----  ----------------------  --------------  --------
  1      Ppp                     1               active
  6      Ethernet                1               active
  11     Atm1483                 1               active

  Receiver Information:
  Index  RemoteFileName
  -----  -------------------------------------------------------
  1      host:/upload/bulkStas.sts

  Index  State     Status
  -----  --------  ---------------------------------------------
  1      notReady  Copy source does not exist or is unreachable

Collector  Virtual-Routers
---------  ---------------
33             serviceProviderABC
655             default

Meaning

Table 1 lists the show bulkstats command output fields.

Table 1: show bulkstats Output Fields

Field Name	Field Description
AdminStatus	Administrative status of the bulk statistics application
OperStatus	Operational status of the bulk statistics application, enabled or disabled
Interface Description Setting	Method used to encode the ifDescr object: common, proprietary, industry-common
File Format	End of the line format in bulkstats files, carriage return and line feed (CR+LF) or LF
Current Time	Current system time used to compare with the collection stop/start time
Intervals	Number of times the bulk statistics collector has cycled through a collection
PrimaryXfers	Number of times the bulk statistics collector has attempted a data file transfer to a primary server
PrimaryFails	Number of primary server transfer failures
SecondaryXfers	Number of times the bulk statistics collector has attempted a data file transfer to a secondary server
SecondaryFails	Number of secondary server transfer failures
BulkStats Collector Information
Index	Bulk statistics collector index number
CurrSize	Current size of the bulk statistics file in bytes
MaxSize	Maximum size configured for the bulk statistics file in bytes
Intrvl	Time interval between bulk collections in seconds
Mode	How often the collector is set up to collect statistics: periodic—Collects statistics periodically single-interval—Collects statistics once only
XferMode	Collect mode configured for the collector: auto—Agent transfers file when interval expires manual—Network management system or the user initiates transfers onFull—Agent transfers file when it reaches the maximum size
State	inProg—Collector is properly configured and currently active notInSvc—Collector has been decommissioned by a management client notReady—Collector does not have enough configuration information to go active error—Configuration or operational error
Primary-Receiver	Index number of the primary receiver to which the system transfers data, if defined
Second-Receiver	Index of the secondary receiver to which the system transfers data
Last Transfer Failure	Last time that the collector attempted to retrieve statistics and was unsuccessful
Interval Start Time	Start of current interval of bulk collections. The collector began collecting bulk statistics at this time.
Interval Stop Time	End of current interval of bulk collections.
Schema Information
Index	Index number of the schema
Subtree	Type of bulk statistics schema configured on the collector: if-stack, if-stats, policy, QoS, or system
CollectorIndex	Bulk statistics collector index number
Create-Delete Time Stats	State of final statistics collection (enabled or disabled)
Create-Delete Interface Type	Interface type associated with final statistics collection (ATM 1483, IP, PPP)
State	active—Schema is properly configured and currently active notInSvc—Schema has been decommissioned by a management client notReady—Schema does not have enough configuration information to go active error—Configuration or operational error
Subtree List	Types of statistics the schema is configured to receive
Interface Types
Index	Index number of the interface type entry
Type	Interface type for which bulk statistics collection is configured
CollectorIndex	Index number of the collector to which the interface type applies
State	active—Interface type is properly configured and currently active notInSvc—Interface type has been decommissioned by a management client notReady—Interface type does not have enough configuration information to go active error—Configuration or operational error
Receiver Information
Index	Index number of the receiver
RemoteFileName	Hostname, path, and filename of the remote FTP server
State	active—Receiver is properly configured and currently active notInSvc—Receiver has been decommissioned by a management client notReady—Receiver does not have enough configuration information to go active error—Configuration or operational error
Status	Success Copy source does not exist or is unreachable Copy failed File in use
Virtual Router Groups
Collector	Number that identifies the particular data collector, in the range 1–65535
Virtual-Routers	Set of virtual router names (up to 64 names)