Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Troubleshooting Subscriber Preauthentication

    Problem

    Description: You can configure the router to send traps to SNMP when a RADIUS preauthentication server fails to respond to messages. To do so, you use the same procedure and commands as you do to configure SNMP traps for a RADIUS authentication server.

    Solution

    For example, to enable SNMP traps when a particular RADIUS preauthentication server fails to respond to Access-Request messages, use the radius trap auth-server-not-responding enable command.

    Published: 2014-08-20