Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Setting Baselines for Layer 2 Services over MPLS Statistics

    You can set a baseline for the statistics for all MPLS major interface statistics on the specified interface with the baseline mpls interface command. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline when you retrieve baseline-relative statistics.

    Use the delta keyword with the show mpls commands to display baselined statistics. The following statistics are maintained for each MPLS shim interface:

    • receive packets and octets
    • transmit packets and octets
    • receive discarded packets
    • transmit discarded packets
    • receive error packets
    • transmit error packets

    To set a statistics baseline for layer 2 services over MPLS:

    • Issue the baseline mpls interface command:
      host1#baseline mpls interface
     

    Related Documentation

     

    Published: 2014-08-18