Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    Before You Configure VRRP

    Before you configure VRRP, you must configure an IP interface and assign a primary IP address and subnet mask. When the IP address belongs to the owner of the VRID, you must associate the IP address with the VRID that you create.

    To configure the IP interface for VRRP:

    1. Configure an IP interface.
      host1(config)#interface fastEthernet 4/0
    2. Assign an IP address and a subnet mask.
      host1(config-if)#ip address

      Note: We recommend that you complete all IP address configurations before you configure VRRP. If for any reason the IP address information changes after you configure VRRP, you must revise the associated IP addresses configured on the related VRRP entries. If you specify auto addresses in the ip vrrp virtual-address command along with using priority 255, you must disable and reenable the VRRP entry to update the association list.


    Related Documentation


    Published: 2014-08-12