Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Setting the Baseline for VPLS Statistics

    You can use the following baseline commands to set a statistics baseline for a VPLS instance, for a network interface associated with a VPLS instance, or for the VPLS virtual core interface associated with a VPLS instance. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.

    Use the delta keyword with the show bridge commands display baselined statistics.

    Tasks to set a baseline for VPLS statistics are:

    Setting a Baseline for a VPLS Instance

    To set a statistics baseline for a VPLS instance:

    • Issue the baseline bridge command.
      host1#baseline bridge vplsA

    Setting a Baseline for a Network Interface associated with a VPLS Instance

    To set a statistics baseline for the VPLS network interface:

    • Issue the baseline bridge interface command.
      host1#baseline bridge interface gigabitEthernet 4/1

    Setting a Baseline for the VPLS Virtual Core Interface associated with a VPLS Instance

    To set a statistics baseline for the VPLS virtual core interface:

    • Issue the baseline bridge interface vpls command.
      host1#baseline bridge interface vpls vplsA

    Published: 2014-08-18