Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Setting an Advisory Receive Speed for VLAN Subinterfaces

    You can use the vlan advisory-rx-speed command to set an advisory receive speed for VLAN subinterfaces that are created with a VLAN base profile. This setting has no effect on data forwarding. You can use it to indicate the speed of the client interface. When traffic is tunneled with L2TP, the advisory receive speed is sent from the LAC to the LNS. See LAC Configuration Prerequisites for additional information about the advisory receive speed. The range is 0–2147483647 kbps; 0 indicates no advisory speed setting.

    To set an advisory receive speed for VLAN subinterfaces:

    • Issue the vlan advisory-rx-speed command in Profile Configuration mode.
    host1(config-profile)#vlan advisory-rx-speed 2000

    Use the no version to restore the default behavior—the Rx speed is not sent to the LNS.

    Published: 2014-08-14