Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Static VLAN Major Interface to Support Autodetection of a VLAN Dynamic Interface Type

    You can use the auto-configure vlan command to configure the static VLAN major interface to support autodetection of an VLAN dynamic interface type. Issue this command to enable creation of a dynamic VLAN subinterface. By default, all valid VLAN IDs and S-VLAN IDs are accepted.

    To configure the static VLAN major interface to support autodetection of an VLAN dynamic interface type:

    • Issue the auto-configure vlan command in Interface Configuration mode.
    host1(config-if)#auto-configure vlan

    Use the no version to terminate autodetection of the VLAN dynamic interface type.

    Published: 2014-08-14