Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring an S-VLAN Subinterface

    To configure an S-VLAN subinterface:

    1. Specify a Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet port.
      host1(config)#interface fastEthernet 4/0
    2. Specify VLAN as the encapsulation method.
      host1(config-if)#encapsulation vlan

      The VLAN major interface is added.

    3. Create a VLAN subinterface by adding a subinterface number to the interface identification command.
      host1(config-if)#interface fastEthernet 4/1.1
    4. Assign an S-VLAN ID and a VLAN ID for the subinterface.
      host1(config-if)#svlan id 4 255
    5. Assign an S-VLAN Ethertype.
      host1(config-if)#svlan ethertype 88a8

    Published: 2014-08-14