Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Enabling SNMP Link-Status Traps on an IP Interface

    You can use the snmp trap ip link-status command to enable link-status traps on an IP interface.

    To enable link-status traps on an IP interface:

    • Execute the snmp trap ip link-status command in Interface Configuration mode.
      host1(config-if)#snmp trap ip link-status

      Use the no version to disable link-status traps on an IP interface.

    Published: 2014-08-12