Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the SNMP Trap Egress Rate for an SNMP Host

    You can control the SNMP trap egress rate, specify the method of handling a full queue, and specify the maximum number of traps kept in the queue by using the following keywords with the snmp-server host command:

    • drainRate—Specifies the maximum number of traps per second sent to the host
    • full—Specifies the method for handling the queue full condition
    • size—Specifies the maximum number of traps kept in the queue

    To control the SNMP trap egress rate for the host that is receiving SNMP traps:

    • Execute the snmp-server host command in Global Configuration mode.
      host1(config)#snmp-server host 10.10.10.10 trapqueue drainrate 600 full droplastin size 50

      Use the no version to remove the SNMP host.

    Published: 2014-08-12