Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Delta Sampling for the Trigger

    You can use the delta-sampling command to specify delta sampling for the trigger you are configuring.

    You can use the discontinuity-id option with the delta-sampling command to specify a discontinuity MIB ID for the sample. The discontinuity MIB ID monitors the sample for any discontinuity errors during the sample frequency. If a discontinuity error occurs, the router removes the sampling for that interval.

    You can use the discontinuity-id-type option with the delta-sampling command to specify a discontinuity ID type (either timeStamp or timeTicks). The discontinuity ID type indicates the time value that you expect for a specific sample.

    To specify delta sampling for the trigger you are configuring:

    • Execute the delta-sampling command in SNMP Trigger Configuration mode.
      host1(config-mgmtevent-trigger)#delta-sampling

      Use the no version to turn off delta sampling and use absolute sampling (the default).

    Published: 2014-08-12