Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the SNMP Server Dynamic Groups and Views

    You can fine-tune application features to a specific group by using dynamic configurable views and groups. You can have 32 view entries (with distinct names) per virtual router. Because there is no limit to the number of entries within a distinct view name, you can configure complex views. You can also have 32 access entries (with distinct names) per virtual router. All views are on a per-virtual-router basis; although static views are on a per-virtual-router basis, they cannot be altered. If you modify a view, the system deletes the original entry and creates the new view. Therefore, if the new view fails, the original view is no longer available.

    Note: SNMP v3 configurations are allowed only at the maximum CLI privilege level (15).

    To dynamically configure server groups and views:

    • Dynamically configure an SNMP server group.
      host1(config-profile)#snmp-server group grp1authpriv usm priv read grp1read write grp1write notify grp1notify

      Use the no version to remove the dynamically created group.

    • Dynamically configure an SNMP server view.
      host1(config)#snmp-server view view1 1.3.6.1 included non-volatile

      Use the no version to remove the dynamically created view.

    Published: 2014-08-12