Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Working with Service Session Profiles

    This topic describes the settings you can configure for a new service session profile or the attributes you can modify in an existing service session profile. Creating or modifying a service session profile comprises the following sets of tasks:

    Note: To modify an existing profile, you can add new attributes or use the no version of a command to remove an attribute.

    Creating a New Service Session Profile

    You can create a new service session profile, and enter Service Session Profile Configuration mode by using the service-management service-session-profile command. You can also use this command to modify the attributes of a previously created profile.

    To create a new service session profile:

    • Issue the service-management service-session-profile command in Global Configuration mode. Issuing this command enables you to access Service Session Profile Configuration mode.
      host1(config)#service-management service-session-profile vodISP1 host1(config-service-session-profile)#

      In Service Session Profile Configuration mode, you specify the attributes used in the service session profile, such as the maximum volume limit for the session and the maximum time the session can be used. You can also specify that Service Manager collect statistics for time, or volume, or both.

      Use the no version to delete the service session profile.

    Specifying Statistics Collection Settings

    You can use the statistics command in Service Session Profile Configuration mode to enable statistics collection and to specify the type of statistics to collect.

    • Use the time keyword with the statistics command to collect statistics about the duration of the service session.
      host1(config)#service-management service-session-profile vodISP1 host1(config-service-session-profile)#statistics time
    • Use the volume-time keyword with the statistics command to collect statistics about both the volume of traffic and the duration of the service session.
      host1(config)#service-management service-session-profile vodISP1 host1(config-service-session-profile)#statistics volume-time

      Use the no version to disable statistics collection.

      Note: Service Manager statistics collection is a three-part procedure. You must configure statistics information in the service definition macro file, enable statistics collection by either RADIUS or the CLI, and also enable statistics collection for the policy referenced in the service macro using the statistics enabled keyword in the command used for policy attachment in the profile. See Configuring Service Manager Statistics.

    Specifying the Maximum Bandwidth for a Service Session

    You can use the volume command in Service Session Profile configuration mode to specify the maximum amount of bandwidth that can use the service.

    To configure the maximum amount of bandwidth for a service session:

    • Issue the volume command in Service Session Profile configuration mode.
      host1(config)#service-management service-session-profile vodISP1 host1(config-service-session-profile)#volume 1000000

    The router immediately terminates the subscriber’s service session when the specified traffic volume is exceeded. The range is 0–16777251MB.

    Use the no version to delete the volume attribute from the service session profile.

    Note: The volume attribute uses values captured by the Service Manager statistics feature to determine when the threshold is exceeded. Therefore, you must configure and enable statistics collection to use this attribute. See Configuring Service Manager Statistics.

    Specifying the Interval for the Active State of a Service Session

    You can use the time command in Service Session Profile configuration mode to specify the maximum amount of time that the service session can be active for the subscriber.

    To configure the maximum duration for which a subscriber service session can be active:

    • Issue the time command in Service Session Profile configuration mode.
      host1(config)#service-management service-session-profile vodISP1 host1(config-service-session-profile)#time 6000

      The router immediately terminates the subscriber’s service session when the specified time is exceeded. The range is 0–16777251 seconds.

      Use the no version to delete the time attribute from the service session profile.

    Published: 2014-08-20