Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Defining IPv6 Access Lists

    You can use the ipv6 access-list command to define an IPv6 access list to permit or deny routes on the basis of the prefix. Each access list is a set of permit or deny conditions based on how they match a route's prefix.

    You can use the neighbor distribute-list command to apply the access list to routes received from or forwarded to a neighbor.

    You can use the log keyword to log an Info event in the ipAccessList log whenever an access list rule is matched.

    To define an IPv6 access list to permit or deny routes on the basis of the prefix:

    • Issue the ipv6 access-list command in Global Configuration mode.
    host1(config)#ipv6 access-list bronze deny 1::1/16 any

    Use the no version to delete an IPv6 access list (no other options specified), the specified entry in the access list, or the log for the specified access list or entry (by specifying the log keyword).

    Published: 2014-08-12