Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring RADIUS-Initiated Disconnect

    To configure RADIUS-initiated disconnect feature, perform the following steps to set up the RADIUS dynamic-request server that will perform the disconnect operation:

    1. Configure the RADIUS dynamic-request server, and enter RADIUS Configuration mode.
      host1(config)#radius dynamic-request server 10.10.5.10host1(config-radius)#
    2. Enable the RADIUS-initiated disconnect capability on the RADIUS dynamic-request server.
      host1(config-radius)#subscriber disconnect
    3. Define the secret used in the RADIUS Authenticator field during exchanges between the RADIUS dynamic-request server and the RADIUS server.
      host1(config-radius)#key Secret3Clientkey
    4. (Optional) Specify the UDP port on which the RADIUS dynamic-request server listens for messages from the RADIUS server. The default is 1700.
      host1(config-radius)#udp-port 1770

    Published: 2014-08-20