Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Strict-Priority Scheduling
To configure strict-priority scheduling:
- Configure the traffic classes.host1(config)#traffic-class Low-loss-1 host1(config-traffic-class)#exit host1(config)#traffic-class Low-latency-1 host1(config-traffic-class)#exit host1(config)#traffic-class Low-latency-2 host1(config-traffic-class)#exit
- Configure the auto-strict-priority traffic-class group,
and add the traffic classes that must receive strict-priority scheduling
to the group.host1(config)#traffic-class-group Strict-priority auto-strict-priority host1(config-traffic-class-group)#traffic-class Low-latency-1 host1(config-traffic-class-group)#traffic-class Low-latency-2 host1(config-traffic-class-group)#exit
- Create a scheduler profile for strict-priority traffic
and configure the shaping rate. host1(config)#scheduler-profile strictPriorityBandwidth host1(config-scheduler-profile)#shaping-rate 20000000 host1(config-scheduler-profile)#exit
- Configure a QoS profile.host1(config)#qos-profile Example-qos-profile host1(config-qos-profile)#atm group default host1(config-qos-profile)#atm group Strict-priority scheduler-profile strictPriorityBandwidth host1(config-qos-profile)#atm-vc node group default host1(config-qos-profile)#atm-vc node group Strict-priority host1(config-qos-profile)#atm-vc queue traffic-class best-effort host1(config-qos-profile)#atm-vc queue traffic-class Low-loss-1 host1(config-qos-profile)#atm-vc queue traffic-class Low-latency-1 host1(config-qos-profile)#atm-vc queue traffic-class Low-latency-2 host1(config-qos-profile)#exit
- Attach the QoS profile to an interface.host1(config)#interface atm 2/0 host1(config-if)#qos-profile Example-qos-profile host1(config-if)#exit host1(config)#
This configuration creates the hierarchy shown in Figure 1.
Figure 1: Sample Strict-Priority Scheduling Hierarchy
