Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Creating Parameter Instances

    You can create QoS parameter instances globally, for an interface, or for a subinterface.

    Tasks to create parameter instances are:

    Creating a Global Parameter Instance

    To create a global parameter instance:

    • Create a parameter instance in Global Configuration mode.
      host1(config)#qos-parameter max-subscriber-bandwidth 6000000

    Creating a Parameter Instance for an Interface

    To create a parameter instance for an interface:

    1. Specify an interface.
      host1(config)#interface atm 11/0.1 host1(config)#interface gigabitEthernet 2/0
    2. Specify the parameter name and the value.
      host1(config-subif)#qos-parameter max-subscriber-bandwidth 6000000

    Creating a Parameter Instance for an ATM VP

    Use this procedure to attach a parameter instance to a VP on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

    To create a parameter instance for an ATM VP:

    1. Configure the ATM VP.
      host1(config)#interface atm 2/0 host1(config-if)#atm vp-tunnel 4
    2. Do either of the following:
      • Attach the parameter instance to an ATM VP on the interface.
        host1(config-if)#atm-vp 4 qos-parameter max-subscriber-bandwidth 375000
      • Attach the parameter instance and associate with the QoS profile.
        host1(config-if)#atm-vp 4 qos-profile video qos-parameter max-subscriber-bandwidth 375000

    Creating a Parameter Instance for an S-VLAN

    Use this procedure to attach a parameter instance to a specified S-VLAN ID on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

    To create a parameter instance for an S-VLAN:

    1. Specify the Ethernet interface and create the VLAN.
      host1(config)#interface gigabitEthernet 3/0 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 3/0.1
    2. Specify the S-VLAN ID.
      host1(config-if)#svlan id 1 202
    3. Attach the parameter instance to an S-VLAN ID on the interface.
      host1(config-if)#svlan 202 qos-parameter max-subscriber-bandwidth 6000000

    Published: 2014-08-11