Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode

    To associate a parameter instance with the QoS cell mode application:

    1. Configure traffic classes.
      host1(config)#traffic-class voice host1(config-traffic-class)#exit host1(config)#traffic-class best-effort host1(config-traffic-class)#exit
    2. Create a parameter definition.
      1. Configure the QoS parameter name and the application.
        host1(config)#qos-parameter-define shaping-mode application qos-cell-mode
      2. Configure a controlled-interface type.
        host1(config-qos-parameter-define)#controlled-interface-type vlan host1(config-qos-parameter-define)#controlled-interface-type ip
      3. Configure an instance-interface type.
        host1(config-qos-parameter-define)#instance-interface-type vlan
    3. Create the parameter instance and configure the shaping mode.

      When you create the parameter instance and configure the shaping mode, the value of frame shaping mode is 0; the value for cell shaping mode is 1.

      host1(config)#interface gigabitEthernet 6/0/2 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 6/0/2.1 host1(config-if)#vlan id 1 host1(config-if)#qos-parameter cell-mode 1 host1(config-if)#ip address 6.10.10.10 255.255.255.255 host1(config-if)#exit host1(config)#interface gigabitEthernet 6/0/2 host1(config-if)#svlan 1 qos-parameter cell-mode 1 host1(config-if)#exit host1(config)#interface gigabitEthernet 6/0/2 host1(config-if)#qos-parameter cell-mode 1

    Published: 2014-08-11